TX16S Instruction Manual

40
Input name: Name of the current entry. Use the scroll wheel to select a letter or
number. Press and hold the ENT key to switch between upper and lower case.
Press the ENT key to switch to the next character.
Line name: Because each entry can have multiple lines of configuration, you can
give each line a name to avoid confusion in the future
Source: Press and hold the ENT key to enter the input source selection menu.
Scroll up or down to the desired category and press ENT to select the
corresponding input source
Weight: Normal range is a value between ± 100% will be zoomed to the gimbal
operation. If you enter a negative value, for example -100% means reverse the output.
Note that channel inversion should not use negative values on the Inputs page, and to
reverse channels should be reversed on the Outputs page.
Offset: Midpoint offset setting