TX16S Instruction Manual

Mix name: Name setting Use the scroll wheel to select letters and numbers, and

press and hold the ENT key to switch between upper and lower case. Short press

the ENT key to set the next character.

Source: Long press the ENT key to pop up the input source category menu.

Weight: Channel travel amount, the range is -500 / + 500. The default value is 100.

Negative values indicate reverse channel output.

Offset: Midpoint offset, you can add the offset of the input value, positive or

negative. Range is -500 / + 500

Trim: You can choose whether the fine-tuning is effective for this entry, or you can

define a fine-tuning that affects this article separately.

Curve: Curve settings