TX16S Instruction Manual

7
the site below for a comprehensive software installation guide for more detailed
instructions https://www.open-tx.org
1.8. Specifications
Specifications: 183 * 212 * 66 mm
Weight: 736g (excluding battery)
Transmission frequency: 2.400GHZ-2.480GHZ
Transmitter module: Internal Four-in-one multi-protocol RF module
Transmit power: maximum 20dbm
Working current: 400mah
Working voltage: 6.6-8.4v DC
Remote control distance:> 2km @ 20dbm
Open source firmware: OpenTX (remote control) DIY-Multiprotocol-TX-Module
(Internal RF Firmware driven by OpenTX)
Number of channels: Up to 16 channels (depending on the receiver)
Display: 4.3-inch TFT full-color display
Gimbals: Non-contact 3D Vector Hall Gimbal
JR / FrSKY Compatible Module Bracket
Upgrade method: Support USB online / SD card offline upgrade
Protocol: Full series DSM2 / X full series Flysky and Flysky 2A FrSKY and many
more.
For a complete list of agreements, visit:
https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/blob/master/Protocols_Details.md
1.9. Warranty and Repair
If you experience any problems with your remote-control hardware, please keep
proof of purchase and contact the retailer where you purchased TX16s. Also visit
https://www.radiomasterrc.com/ for technical support and to find a repair agent in
your region.