TBS Crossfire Manual



Receiver LED status indicator
There are three (Standard Diversity RX) or two (any other receiver) LEDs on the receiver giving you an
indication of link- and backup-battery status.

Find mode is only available with the diversity receivers.

MyVTX
With the new MyVTX menu you can set all your VTx’s to the same channel, band and output power without
accessing all of them. This is useful if you are on a race with multiple drones and have to set them all to
the same channel.
If you enable MyVtx, all other vtx settings will be overridden temporarily, till you disable it again.
Connect your vtx to the Crossfire Rx by CRSF or Smart Audio, activate MyVtx and set the it up*






Receiver LED indicators
Description
Solid green ▀▀▀
Link is up and running OK
Solid red ▀▀▀
No packages received from the transmitter and receiver is in
failsafe mode
Fast red blinking ■ ■ ■ ■
Receiver needs a update, confirmation on the tx is required
Slow green blinking ▀ ▀ ▀
Receiver is in binding mode
Fast green blinking ■ ■ ■ ■
Receiver bootloader active or firmware upgrade running
Green is flashing █ █ █
Diversity RX is in Find-mode (up to 1 min. delay between flashing)
Double green blinking ■ ■
■ ■
Authentication error. Rebind your receiver - more details

30