TBS Crossfire Manual



race-like situation.
Telemetry
Enables or disables the telemetry for the receiver.
When you should disable the telemetry:
● On a race. This frees the band for other pilotes.
● When you got black lines in your video feed. Make sure your cables are shielded or twisted to
avoid this issue in general
If you disable it, dynamic rf, dynamic power and the telemetry will no longer work. This means you
Crossfire Tx will send with the maximum set up power level and switch to 50Hz mode.
The LUA scripts are not affected by this. The Crossfire re-enables the telemetry for the time the datas are
sent and then turns it back off.
 



44