TBS Crossfire Manual
For the OSD tab, set it up like this:
Signal strength in Betaflight - BF 4.1 and later
Since version 4.1 BetaFlight can read the link information from the CRSf stream. This will give you the RSSI
reading in dBm (0 - -130) and the LQ reading similar to the TBS OSD (300 - 0 %).
To use this new method, you need to disable the RSSI channel setting in the receiver tab and activate the
following elements in the
OSD
tab. Also make sure that the
RSSI_ADC
option is disabled (general betaflight
settings)
66