T8 PRO Instruction Manual

Internal RF：Built-in wireless RF module, built-in 4in1 multi-protocol RF module,

please refer to multi-protocol RF module manual for usage

External RF ： External RF module, compatible with many mainstream RF

modules

Trainer

：

Trainer Mode

Mode：

Master/Jack

Audio cable connection, coach host mode

Slave/Jack

Audio cable connection, student slave mode

Master/Bluetooth

Bluetooth wireless connection, coach mode (requires external

Bluetooth module)

Slave/Bluetooth

Bluetooth wireless connection, student slave mode (requires

external Bluetooth module)

Master/Multi

4in1 multi-protocol module coach host mode (This function

needs to add an external 4in1 multi-protocol module as coach

input receiver RX mode)

4.4.2. Flight Mode（Flight Modes）

The flight mode allows you to set the corresponding fine-tuning value for a

specific mission or flight behavior. This item is mainly used for fixed-wing gliders to

use different fine-tuning values in different environments. You can customize the

fine-tuning value of 1-6 channels, and you can set it for each flight. Mode setting

smooth slow-in slow-down time.

There are 8 flight modes plus the default FM0 available. The first item of FM1-

FM8 requires a trigger switch. When no switch is on, FM0 is enabled by default.