TX8 Quick start guide WWW.RADIOMASTERRC.
Introduction Thank you for purchasing the RadioMaster TX8 Multi-protocol Radio system. RadioMaster is proud to bring this ground-breaking product to the market and would like to thank customers just like you and the community for making this dream possible. Please take a moment to read this quick start reference before using your new TX8 radio. -RadioMaster Team. Safety & Precautions Many radio control models are equipped with powerful motors and sharp spinning propellers.
CAUTION! The TX8 is shipped with the most stable firmware at the time of manufacture. Please only update firmware if you are experienced and confident in updating system firmware. Incorrect updates may render the radio inoperable.
Main Screen Display Model and Protocol Selection The TX8 is cable of operating under many different protocols. To view the most up to date list of compatible protocols please visit https://www.deviationtx.com. Please note, new protocols are being added to the software all the time. Some protocols may require the upgrading of your firmware. Model Selection To enter the model setup, press the ENTER button and select Model Menu > Model setup. From here you can create or load models.
Specifications Specs Size: 151.2*88.6*253.7mm Weight: 404g (without battery) Transmission frequency: 2.400GHZ-2.480GHZ Transmitter Module: Four in One High Frequency Module (CC2500 CYRF6936 A7105 NRF2401) Transmit power: maximum 22dbm (transmit power adjustable) Antenna gain: 2db (detachable antenna, easy modification) Working current: 88Ma@8.4V Working voltage: 6.6-8.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This product contains a radio transmitter with wireless technology which has been tested and found to be compliant with the applicable regulations governing a radio transmitter in the 2.416GHz to 2.466GHz frequency range.
FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
