Instructions / Assembly

Orange or Gray
Blue
White
Black
White
Black
Ground
Ground
7
Ground Wire
Support Rod
Ball Hanger
Mounting
Bracket
Keyway Pin
Ball Hanger
Support Rod
Fig. 7
Fig. 8
Fig. 9
Step 5 Making the Electrical Connections
To operate your ceiling fan with the pull chain(s)
and switches mounted on your fan, follow the
instructions below:
Attach the GREEN wire (connected to the half
ball) to the GROUND
wire in the junction box.
The GROUND wire is usually a bare copper wire
without plastic insulation. It could also be cov-
ered in green plastic insulation (see gure 9).
Attach the BLACK wire and the BLUE wire
from the ceiling fan to the BLACK
wire in the
junction box.
Attach the WHITE wire and ORANGE (GRAY
on some models) wire from the fan to the
WHITE
wire in the junction box.
Fold the connected wires (see gure 9) and push
them up inside the electrical junction box with
the black and blue wires to one side and the white
and green to the other side. Make sure the wire
nuts do not come loose during this operation.
Each of the above connec-
tions should be made as tight
as possible using the proper
size plastic wire nuts. Plastic
electrical tape is not recom-
mended for these connec-
tions.