Instructions / Assembly



This ceiling fan was not designed for installation in any location where it

might be exposed to moisture or high humidity. Installation in this type of

location could be UNSAFE, will most likely damage the fan and its finish...

and will VOID YOUR WARRANTY.

Every effort has been made to provide you with proper instructions for the

safe installation of this ceiling fan. You could however, encounter situa-

tions or problems not covered in this manual. Should this occur, please

refer to a do-it-yourself wiring handbook or hire a qualified electrician to

install your fan.

Never attach the blades to your ceiling fan before the fan body is properly

mounted on the ceiling.

Lubrication of your new ceiling fan is not necessary. The ball bearings have

been adequately charged with grease and permanently sealed at the factory

so that, under normal conditions, further attention is not necessary.

Look for Me!

I have safety Tips and

Ideas for installation

To reduce the risk of fire, electrical shock, or personal injury,

mount this fan to an outlet box marked “Acceptable for Fan

Support” and use the Mounting Screws provided with the outlet

box. CA

UTION: Install the primary mounting means and use

only the hardware provided with the fan.

To reduce the risk of personal injury take care not to bend

the

blade carriers. Be careful not to insert foreign objects into rotat-

ing fan blades.

The important safeguards and instructions appearing in this

manual are not meant to cover all possible conditions and situa-

tions that may occur. It must be understood that common sense,

caution and careful attention to detail are factors which cannot

be built into this product. These factors must be supplied by the

person or persons installing, caring for, and operating the unit.