Installation guide

D6600 NetCom

Operation

D6600 NetCom System Guide

Right-click on the icon and

select Properties from the

context menu that appears.

Scroll down in the ”Components checked are used by

this connection:” list and highlight the “Internet Protocol

(TCP/IP)” component.

6. Highlight the protocol icon for

TCP/IP bound to your NIC card

and click the "Properties…"

button.

7. Once the dialog box appears, there will be only one tab called “General.”

Click on the option “Use the following IP address:” and

enter an IP address and subnet mask for the network you

will be setting up, such as 202.96.168.1.

Note: If you have any questions regarding the assignment of

the IP address or subnet mask, see the network

administrator.

All devices that will be on this network must have the correct subnet

mask and gateway entered.

8. Some files may have to be copied to the computer. This

may require Microsoft

Windows

operating system disk

for the appropriate version you are using.

9. After copying the files, the PC may have to be restarted. If so, connect the Host PC's NIC card to the

network (hub) and restart the PC.