33-282 UG.indd 1 TM THE PERFORMANCE YOU NEED Digital Wireless Stereo Headphones Please read this user’s guide before using your new headphones.
33-282 UG.indd 2 Package contents Stereo headphones Transmitter AC adapter 3-foot (91.4cm) RCA Cable ¹/8“ (3.5mm) phono adapter User’s Guide Quick Start /4“ (6.3mm) adapter 1 Features Completely wireless, with a 90-foot (27.
3-282 UG.indd 3 1 Connect transmitter 1. Connect the transmitter to your audio source using the included RCA cable, matching the colors to your output jacks. If needed, use the included ¹/8“ or 1/4“ adapters. 2. Connect the AC adapter to the transmitter and plug into a standard power outlet. Audio Out ¹/8” Headphones Jack ¼” Headphones Jack n Note: Disconnect the adapter from the outlet when you are not using the transmitter and the headphones.
33-282 UG.indd 4 On/Off Turn the headphones on/off. Power LED Lights blue when the headphones are turned on. Volume E-bass On/Off Turn enhanced audio on/off. Voice Clarity Enhances speech and dialogue. Isolation H/L/OFF Adjust ambient sound isolation to H or L to hear a conversation without removing the headphones. Back View of Transmitter CHANNEL 123 AUDIO IN L/R DC 9V Front View of Transmitter On/Off Turn the transmitter on or off.
33-282 UG.indd 5 2. Insert four AAA alkaline or rechargeable batteries (neither included), matching the polarity symbols (+ and –) marked inside. AA A AA A AA A 1. Remove the battery compartment cover on the left ear cup. AA A 2 Install Batteries Channel ALK/RCH 3. Set ALK/RCH to ALK for alkaline or RCH for rechargeable batteries. 4. Set Channel to 1, 2 or 3 to match the setting on the transmitter channel switch. 5. Replace the cover.
33-282 UG.indd 6 3 Charge rechargeable batteries (optional) 1. Turn off the headphones. 2. Make sure rechargeable batteries are installed and ALK/RCH is set to RCH. 3. Dock your headphones on the transmitter in the direction as shown. The LED on the transmitter lights blue. 4. Remove the headphones from the transmitter after charging. Charging connectors Line up triangle icons. R L Charging connectors Power LED Lights blue when charging.
33-282 UG.indd 7 4 Use your headphones Select a location which provides the best performance. 1. Press 1to turn on the transmitter. The ���������� AUVIO logo ����� lights blue. 2. Slide Power On/Off to On to turn on the headphones. The power LED on the headphones lights blue. 3. Set the headphones volume to minimum. 4. Turn on the audio source, and gradually increase the volume to a comfortable level. 5.
33-282 UG.indd 8 Listening Safely Set the headphone volume to the lowest setting before listening. After you begin listening, adjust the volume to a comfortable level. Do not listen at extremely high volume levels. Extended high-volume listening can lead to permanent hearing loss. If you connect the transmitter to an audio source headphone jack, set the audio source’s volume to the middle position. Then adjust VOLUME on the headphones to the desired level.
33-282 UG.indd 9 Limited Warranty Ignition L.P. warrants this product against defects in materials and workmanship under normal use by the original purchaser for ninety (90) days after the date of purchase. IGNITION L.P. MAKES NO OTHER EXPRESS WARRANTIES.
33-282 UG.indd 10 Protect the environment by recycling used electronics. Go to E-CyclingCentral.com to find an electronic recycling center near you. Get more from your audio and video equipment. See what you’ve been missing. With Auvio, you control the experience. Auvio was established by a group of technophiles to provide high quality audio and video products without the high sticker price. The Auvio philosophy is for you to experience audio and video as it was intended to be: pure and distortion free.
