TM THE PERFORMANCE YOU NEED Wireless Digital Earbuds Please read this user’s guide before using your earbuds. User’s Guide 33-284_082609_UG.
Package contents Wireless Earbuds Wireless Transmitter Micro USB to USB charging Y-cable Carrying pouch Silicone tips (three pairs in S/M/L size) User’s Guide Quick Start Features KleerTM technology delivers uncompressed CD-quality digital sound and a much longer battery life than standard Bluetooth earbuds 2.4GHz transmission provides a static-free wireless range of up to 30 feet (9.
1 Charge 1. Open ������������������������������������� the cover and slide both of the ON/OFF switches to ON. The power LED on the transmitter and the AUVIO logo on the earbuds light blue. 2. Connect the USB plug of the supplied Y-cable to the USB port of your computer or any USB charger. 3. Connect the Y-cable’s micro USB plugs to the micro USB port on your earbuds and transmitter. n Note: Charge the built-in battery for at least 2 hours before first use.
AUVIO logo Lights blue when charging. Power button Press and hold to enter sleep mode. ON/OFF Slide to turn the earbuds on/off. Micro USB Port Volume Cover Power LED Lights red when turned on. Flashes red several times a second when battery power is low. Flashes red every second when synchronizing. Flashes red every five seconds when synchronized. Lights blue (only ���������������������������������������� on the transmitter) when �������������� charging. 3.
2 Synchronize Make sure both of the ON/OFF switches are set to ON. The earbuds and the transmitter enter synchronizing mode, and both of the power LEDs flash on and off several times every second. This will take several seconds. After successful synchronization, the unit enters Listening Mode. Both of the power LEDs flash on and off every five seconds. You are ready to listen to music. 3 Listen to Music 1. Slide both of the ON/OFF switches to ON. 2. Connect the transmitter to the 3.
Handling and Disposal: Do not burn or bury batteries. Do not puncture or crush. Do not disassemble. Recycle lithium batteries. Do not dispose of in the trash. Never allow loose cells to short circuit against battery tabs or other conductive items. Keep loose cells and battery packs out of reach of children. If the electrolyte in the cells should get on your skin, thoroughly wash with soap and water. If in the eyes, rinse thoroughly with cool water. Immediately seek medical attention.
Listening Safely Do not wear headphones, earphones, or earbuds while operating a motor vehicle or riding a bicycle. This can create a traffic hazard and could be illegal in some areas. To protect your hearing, follow these guidelines: Do not listen at high volume levels. Extended highvolume listening can lead to permanent hearing loss. Set the volume to the lowest setting. Then turn on your audio device and adjust the volume to a comfortable level. Avoid increasing the volume.
33-284_082609_UG.indd 8 Radio characteristics Frequency range............................................ 2,400 ~ 2,480MHz Channel space.............................................. 5MHz (16Channels) Transmission power...................................................Up to 0dBm Data rate...................................................................... 2.37Mbps Channel separation...............................................................
33-284_082609_UG.indd 9 product removal, installation, set-up service, adjustment or reinstallation; and (g) claims by persons other than the original purchaser. Should a problem occur that is covered by this warranty, take the product and the sales receipt as proof of purchase date to the place of purchase. Ignition L.P.
Protect the environment by recycling used electronics. Go to E-CyclingCentral.com to find an electronic recycling center near you. Get more from your audio and video equipment. See what you’ve been missing. With Auvio, you control the experience. Auvio was established by a group of technophiles to provide high quality audio and video products without the high sticker price. The Auvio philosophy is for you to experience audio and video as it was intended to be: pure and distortion free.