CAT NO. 60-4340 OWNER'S MANUAL Viper FEATURES NOTE You need these availability at our Local Radio Shack store} to wore your Viper One 9V battery Six “AA” batteries for charger of vehicle FCC STATEMENT “Fins device complies with Part 15 of FCU Rules. Operation 1s subject (0 the following two conditions © (1) this device may not cause harmful interference, and {2) this device must accept any interference received, including interference that may cause undesired operation.
CONNECT ANTENNA TX Tide the antenna from antenna holder on the back transmitter. Thread the antenna into the transmitter’s antenna connector. Make sure the connection is tight. IN THE TRANSMITTER You need one 9V battery to power the transmitter. For the best performance and longest fife, we recommend a Radio Shack alkaline battery. This transmitter is L. Loosen the screw on the battery compartment cover and remove the cover, 2.
is pulling to the right. Rotate the control toward R if the car is pulling to the left. DRIVING THE CAR THREE CHANNEL This vehicle has three channel (A / B/C). The back of vehicle and transmitter have switch for the channel. Please set same position both your vehicles and transmitter, WARNING + Do not play with your car in the street. This vehicle can reach much higher speeds than many other radio-controlled cards. "be careful to avoid high-speed collisions with people and objects.
CAUTIONS HELPFUL HINTS These hints can help you get the most enjoyment from your vehicle. If someone uses a CB nearby, it might interfere with control of the vehicle. TF this happens, move the car away farm the CR + Be sure the car is not out of the transmitter's range. The range depends on the surroundings and on battery strength. Obstructions such as buildings, fences, and so on, between the transmitter and the vehicle, reduce the range. + ‘the vehicle has a special circuit to prolong battery life.
USER-REPLACEABLE PARTS You can order these easily replaceable parts for your vehicle at your local Radio Shack store. Simply identify the part(s) you need from this exploded view, then find the part number in the list . Ref No.
