E ® DE-AUG-2001 = 15:44 Wireless Door Chime WREN'S MANUAL — Please read before using this equipment, Your Ramshackle Wireless Door Chime works as § doorbell or a remote pager. You can add sn optional sensor 50 that a chime sounds wham someone walks rte 5 room. The chime is pays Io install because 4 operates on battery power 3nd requires no wiring. THE FCC WANTS YOU TO KNOW This device complies with Part 15 of the FCC Riles.
T= Al 1 ios El more Page 2 Monday. July 9, 2001 46 AM 7? 02-AUG-2081 Remove tha receiver's belt dip by pushing # in the direction of the arrow marked on the battery compartment door, 2. Remove the receiver's battery compartment cover by pressing down and sliding it in the direction of the arrow. 3. Set the channel switch inside the compartment to 4, 2.3, 4, or 5 Note: H your door chime occasionally sounds for no apparent 10250n, another device using the same frequency could be trigger ing It.
wee LAL { a8 i EE%02 0m Page 3 Monday, July 9.2001 8:44 AM Gaff rechargeable batteries of different capacities. When the door chime stops pore sting proper, carapace the altar. ies. # the chime's sound becomes weak or distorted, replace the receiver's rotisseries with rash ones. § tha transmitters battery indicator does rot light or becomes dim when you press the transmitter's BELL bunion, replace the transmitter's battery. Waring: Dispose of oid butteries promptly and property.
B | Somme retrieve * 22-AUG-208 1 15:43 S$. Insert a short screw Hugh the hole on the forward edge of the transmitter and into the threaded holes in the holder. Mounting the Receiver 1. Mark the position of tho scow hole 21 the mounting location, then dirt & Sp-inch diameter hot at the marking. 2. Insert 3 wail anchor info the hale and drive a long Screw into f. laving about “a of the screw exposed. wnt Archer | 3. Tide the receiver over the mounted screw bo secure it OPERATION 1.
| . & Bon Page S Monty. duly 9.2001 P46 AM —® 1. Spit the ends of the wire, 2. Connect the wire from the sensor's switch to the screw holes on the back of the transmitter using wo of the sup plied short screws. if the sen Sor You are using has both nor mall open ang normally closed contacts. be sum to connect 0 the sensor's nor mall open contacts. 3. Set the receiver's OFFENSE witch ks ON. Then rigger the sensor io tots the chime.