Operation Manual

Need help? Call 1-800-763-9232
14
SETTING UP THE 7-IN-ONE
Note:
For the best operation, you should be
within 15 feet of the device you want to oper-
ate.
TO OPERATE YOUR TV
Locate the codes for your TV in “Televisions”
on Page 52 and write them down on the sup-
plied label.
Note:
Some manufacturers have several
codes listed. Try each until you find the right
one. The brands are listed in alphabetical or-
der, with the most popular codes listed first.
Then follow these steps to program the 7-in-
One to operate your TV.
1. Turn on your TV.
2. Press
TV
then hold down
P
until
TIMED
SEQ
appears.
3. Press .
CODE SETUP
appears.
4. Repeatedly press
SELECT
until
TV
appears.
5. Enter the first four-digit code listed for
your TV’s brand, then press
SELECT
.
Note:
If the 4-digit code begins with
zero, only the last 3-digits will appear on
the display.
6. Point the 7-in-One at your TV and press
POWER
. Your TV should turn off. If it
does not, enter the next code from the
list and press
SELECT
then
POWER
again. When your TV turns off, press
ESCAPE
to stop programming.
15-1995.fm Page 14 Thursday, March 2, 2000 7:40 AM