Operation Manual

Need help? Call 1-800-763-9232
15
TO OPERATE YOUR VCR
Locate the codes for your VCR in “VCRs” on
Page 65 and write them down on the sup-
plied label.
Note:
Some manufacturers have several
codes listed. Try each until you find the right
one. The brands are listed in alphabetical or-
der, with the most popular codes listed first.
Then follow these steps to program the 7-in-
One to operate your VCR.
1. Turn on your
VCR
and insert a tape.
2. Press
VCR
then hold down
P
until
TIMED SEQ
appears.
3. Press .
CODE SETUP
appears.
4. Repeatedly press
SELECT
until VCR
appears.
5. Enter the first four-digit code listed for
your VCR’s brand, then press
SELECT
.
Note:
If the 4-digit code begins with
zero, only the last 3-digits will appear on
the display.
6. Point the 7-in-One at your VCR and
press
POWER
or
PLAY
. Your VCR
should turn off or start to play. If it does
not, enter the next code from the list and
press
SELECT
then
POWER
or
PLAY
again. When your VCR turns off or
plays, press
ESCAPE
to stop program-
ming.
15-1995.fm Page 15 Thursday, March 2, 2000 7:40 AM