Operation Manual

Need help? Call 1-800-763-9232
17
6. Point the 7-in-One at your TV/VCR
Combo and press
POWER
or
PLAY
.
Your TV/VCR Combo should turn off or
start to play. If it does not, enter the next
code from the list and press
SELECT
then
POWER
or
PLAY
again. When your
TV/VCR Combo turns off or plays, press
ESCAPE
to stop programming.
TO OPERATE YOUR CABLE
CONVERTER
Locate the codes for your cable converter in
“Cable Converters” on Page 40 and write
them down on the supplied label.
Note:
Some manufacturers have several
codes listed. Try each until you find the right
one. The brands are listed in alphabetical or-
der, with the most popular codes listed first.
Then follow these steps to program the 7-in-
One to operate your cable converter.
1. Turn on your cable converter.
2. Press
CBL
then hold down
P
until
TIMED SEQ
appears.
3. Press .
CODE SETUP
appears.
4. Repeatedly press
SELECT
until
CABLE
appears.
5. Enter the first four-digit code listed for
your cable converter’s brand, then press
SELECT
.
Note:
If the 4-digit code begins with
zero, only the last 3-digits will appear on
the display.
15-1995.fm Page 17 Thursday, March 2, 2000 7:40 AM