Operation Manual

Need help? Call 1-800-763-9232
19
Note:
If the 4-digit code begins with
zero, only the last 3-digits will appear on
the display.
6. Point the 7-in-One at your satellite
receiver and press
POWER
. Your satel-
lite receiver should turn off. If it does
not, enter the next code from the list and
press
SELECT
then
POWER
again.
When your satellite receiver turns off,
press
ESCAPE
to stop programming.
TO OPERATE YOUR CD
PLAYER
Locate the codes for your CD player in “CD
Players” on Page 44 and write them down on
the supplied label.
Note:
Some manufacturers have several
codes listed. Try each until you find the right
one. The brands are listed in alphabetical or-
der, with the most popular codes listed first.
Then follow these steps to program the 7-in-
One to operate your CD player.
1. Turn on your CD player and insert a
disc.
2. Press
CD
then hold down
P
until
TIMED
SEQ
appears.
3. Press .
CODE SETUP
appears.
4. Repeatedly press
SELECT
until
CD
appears.
5. Enter the first four-digit code listed for
your CD player’s brand, then press
SELECT
.
15-1995.fm Page 19 Thursday, March 2, 2000 7:40 AM