Operation Manual

Need help? Call 1-800-763-9232
21
6. Point the 7-in-One at your Tuner/
Receiver and press
POWER
. Your
Tuner/Receiver should turn off. If it
does not, enter the next code from the
list and press
SELECT
then
POWER
again. When your Tuner/Receiver turns
off, press
ESCAPE
to stop programming.
TO OPERATE YOUR
AMPLIFIER
Locate the codes for your Amplifier in “Ampli-
fiers” on Page 39 and write them down on
the supplied label.
Note:
Some manufacturers have several
codes listed. Try each until you find the right
one. The brands are listed in alphabetical or-
der, with the most popular codes listed first.
Then follow these steps to program the 7-in-
One to operate your amplifier.
1. Turn on your amplifier.
2. Press
AMP
then hold down
P
until
TIMED SEQ
appears.
3. Press .
CODE SETUP
appears.
4. Repeatedly press
SELECT
until
AMP
appears.
5. Enter the first four-digit code listed for
your amplifier’s brand, then press
SELECT
.
Note:
If the 4-digit code begins with
zero, only the last 3-digits will appear on
the display.
15-1995.fm Page 21 Thursday, March 2, 2000 7:40 AM