Operation Manual

Need help? Call 1-800-763-9232
26
1. Press the device key for the device you
want to scan (
TV
,
CBL
,
SAT
).
2. Hold down
P
until
TIMED SEQ
appears.
3. Press twice.
CONFIGURE
appears.
4. Press
SELECT
.
THEATR SEL
appears.
5. Press until
FAVCH SCAN
appears.
6. Press
SELECT
.
CH
appears.
7. Enter the first channel number you want
to include in your favorite channel list,
then press
P
.
Notes:
• Precede a single-digit number with a
0. For example, 0 1, 02, and so on.
• If you enter a three-digit number, you
do not need to press
P
after entering
the number.
• If you use an
ENTER
key to directly
access channels on your original
remote, press
ENTER
after you enter
the last digit of a channel number.
8. Repeat Step 7 for up to 9 other channels
you want to include in your list.
9. Press
ESCAPE
to end programming.
10. To scan through your favorite channel
list, press the appropriate device key,
point the remote at your device, then
press
SCAN
. The remote control repeat-
edly scans through the favorite channel
list, stopping on each channel for about
3 seconds.
11. Press any key when you see a channel
you want to watch. Scanning stops.
15-1995.fm Page 26 Thursday, March 2, 2000 7:40 AM