Operation Manual

Need help? Call 1-800-763-9232
36
CLEAR ALL
Use the Clear All feature to reset all ad-
vanced functions of the 7-in-One. Clear All
erases macro sequences, timed macro se-
quences, and Volume Punch-Through from
the 7-in-One’s memory. It does not erase the
set-up codes you programmed.
To reset the 7-in-One using the Clear All fea-
ture:
1. Hold down
P
until
TIMED SEQ
appears.
2. Press twice.
CONFIGURE
appears.
3. Press
SELECT
.
THEATR SEL
appears.
4. Press .
CLEAR ALL
appears.
5. Press
SELECT
.
CLR ALL
appears.
6. Press
SELECT
.
CONFIRM
appears.
7. Press
SELECT
once more. Your 7-in-
One is reset.
USING THE IR/RF COMMAND
CENTER
The 7-in-One comes with an IR/RF Com-
mand Center which receives radio frequency
signals form the 7-in-One and converts them
into infrared (IR) signals to control your com-
ponents.
Note:
The 7-in-One’s actual range depends
on the construction of the building where it is
used, as well as other factors, such as radio
frequency interface. For the best operation:
• Aim the 7-in-One toward the room
where the Command Center is located.
15-1995.fm Page 36 Thursday, March 2, 2000 7:40 AM