Operation Manual

Need help? Call 1-800-763-9232
7
QUICK SETUP
The steps in this section tell you how to
quickly set up the 7-in-One to operate all of
your devices.
To set up devices individually, or add a de-
vice after you have set up the 7-in-One, see
the appropriate section under “Setting Up the
7-in-One” on Page 14.
Note:
For the best operation, you should be
within 15 feet of the device you want to con-
trol.
Follow these steps for quick setup:
1. Turn on all of the devices you are setting
up.
2. Press
TV
.
3. Hold down
P
until
TIMED SEQ
appears.
4. Press .
CODE SETUP
appears.
5. Press
SELECT
.
DEV SET UP
appears.
6. Press
SELECT
again.
TV
appears.
7. Enter the fist four-digit TV code listed for
your TV’s brand in “Televisions” on
Page 52 then press
SELECT
.
Note:
If the 4-digit code begins with
zero, only the last 3-digits will appear on
the display.
8. Point the remote at your TV and press
POWER
. Your TV should turn off. If it
does not, enter the next code from the
list and press
SELECT
then
POWER
again. When your TV turns off, press
VCR
.
VCR
appears.
15-1995.fm Page 7 Thursday, March 2, 2000 7:40 AM