Specifications
85
D
Error messages
Boot failures
The System BIOS attempts to display an error message on the VGA and halts when
it encounters the following error conditions:
1. Fixed disk error
• No drive connected
• Configured for 0 cylinders
• Controller reset failed
• Drive not ready
• Track 0 seek timed out
• Drive initialization failed
• Drive recalibration failed
• Last track seek failed
2. Video error
• Color/Mono switch not set correctly
3. Timer error
• System timer (0) failed
4. Diskette error
• Floppy type does not match setup
5. I/O chip error
• I/O conflicts exist for serial and parallel ports, floppy, hard disk (any or all)
6. Other error
• IRQ conflict, unsupported COM port configuration, keyboard locked
• Pentium cooling fan has failed
• The System BIOS prints an error message but does not halt when it
encounters the following error conditions:
• Configuration error
• Previous POST execution was incomplete
• User BIOS Extension Region X exceeds DFFFFh