Specifications

EPC-8 Hardware Reference
E E
E-6
EXP-BP5 Subplane
The EXP-BP5 subplane is
used to build a system with a
processor, four EXM
modules, and an EXP-MX
Mass Storage module. The
EXP-BP5 has six connectors
on the front side and five on
the rear.
After jumpering the
backplane, plug the subplane
into the VMEbus backplane
such that the P2 connector
on the back of the 4-row
DIN is pressed into the J2
connector of the left-most
VMEbus slot that the EPC-8
subsystem will occupy.
The EXM slot numbers are
shown in the drawing.
Figure E-5. EXP-BP5 Subplane.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com