Specifications

EPC-8 Hardware Reference
K-4
K
K
6. Modify/create NET.CFG according to the environment. For example:
Link Driver NE2000
Frame Ethernet_802.3
Protocol IPX
Port 300 f
7. Reboot the system.
NDIS Driver for DOS Installation
The NDIS ethat2 driver is used for 16-bit Western Digital mode and 16-bit NE2000
mode for the NDIS interface. It is used by various protocol stacks and applications,
such as Windows for Workgroups (WFW). NDIS 3.0 protected mode support is
already included in WFW. The steps below would be part of a typical setup for NDIS
2.0 real mode.
1. Set up PROTOCOL.INI according to the environment. To set up ethat2 for
NE2000 using IRQ3 and I/O base address 300, refer to the example below.
[EXM10A]
DriverName=ETHAT20$
IOBASE=0x300
INTERRUPT=3
[MS$NETBEUI]
DriverName=netbeui$
SESSIONS=10
NCBS=32
LANABASE=1
BINDINGS=EXM10A
[NETBEUI]
LANABASE=1
BINDINGS=EXM10A
2. At the command line, enter NET START WORKSTATION.
3. At the command line, enter NET VIEW to verify access to other
computers.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com