Specifications

EPC-5A Hardware & Software Reference Manual
Page 18
33
EXP-BP3A Subplane
The EXP-BP3A subplane is used to add
an EXP-MC Module Carrier for the
addition of one or two more EXM
modules to an EPC-5A processor
module. The EXP-BP3A has five
connectors on each side.
After jumpering the backplane, plug the
subplane into the VMEbus backplane
such that the P2 connector on the back of
the 4-row DIN is pressed into the J2
connector of the left-most VMEbus slot
that the EPC-5A subsystem will occupy.
The subplane has holes for optional
bolting to the VMEbus backplane using
the screws included.
The EXM slot numbers are shown in the
drawing.
Figure 3-3. EXP-BP3A Subplane.