Specifications

Chapter 4: BIOS Configuration
44
Page 39
EXM Menu
Use the options in this menu to select and configure the available EXM slots.
The required configuration information is found in the hardware reference manual
shipped with each EXM expansion module.
The EXM Menu is shown below.
Figure 4-8. EXM Menu.
ID
This option is used to select the EXM ID byte value for the EXM card intended to
reside in this slot. If the BIOS finds that the ID set with this option does not agree
with the ID of the card actually installed in the slot, an EXM configuration error
occurs and the card is not configured. For a slot with no EXM card installed, enter
FFh, the default value.
PhoenixBIOS Setup - Copyright 1985-96 Phoenix Technologies Ltd.
Item Specific Help
EXM Slot 0
F1 Hel
p
↑↓
Select Item -/+ Chan
g
e Values F9 Setu
p
Defaults
ESC Exit
←→
Select Menu Enter Select Sub-Menu F10 Previous Values
<Tab>, <Shift-Tab>, or
<Enter> selects field.
Main Advanced EXM VME Exit
Option Byte 1 [00]
ID: [FF]
EXM Slot 1
Option Byte 2 [00]
ID: [FF]
Option Byte 2 [00]
Option Byte 1 [00]
EXM Slot 2
ID: [FF]
Option Byte 2 [00]
Option Byte 1 [00]
EXM Slot 3
ID: [FF]
Option Byte 2 [00]
Option Byte 1 [00]