User Manual

DELETE MEMORY (Refer to 11)

1. Select your desired band by pressing [BAND] button;

2. Press the [VM/VF] button to switch into frequency mode, switch

to address status;

3. Press & hold the [DELETE] button until “DEL” and “memory

address” flashing;

4. Rotate the [TUNING] knob to select the memory that you want to

delete;

5. Press the [DELETE] button to remove the unwanted

memory address.

AUTO BROWSE MEMORY (Refer to 11)

1. Select your desired band by pressing [BAND] button;

2. Press the [VM/VF] button to switch into frequency mode, switch to

address status, with memory address number flashing;

3. Press & hold / button, auto scan from one memory to

another, staying on each station for about 5 seconds.

4. To stop auto search memory, simply press the / button.

SQUELCH SETTING (Refer to 17)

1. Press the [POWER] button to turn on the radio and select your

desired band by pressing [BAND] button；

2. Press & hold [SQUELCH] button，Switch to the signal strength

selection page；

3. Rotate the [TUNING] knob to select signal strength；

4. Press the [SQUELCH] button again to confirm

SWITCH SOUND MODE (Refer to 16)

1.Turn on the radio and select any band you desired ；

2. Press & hold number“4”button，and then switch the sound mode

MUSIC/VOICE.

TUNING SPEED SETTING (Refer to 17 )

1. Turn on the radio and select any band you desired；

2. Press the [SQUELCH] button to select Fast/Slow speed or

select Stop to lock station.