User Manual

Notes:

1. Ignore the decimal point for FM band when inputting

the frequency numbers.

For example, FM 89.3 MHz, just enter 8 9 3.

2. If the entered frequency is not within the covering area,

the display would display “Err” (error) symbol.

►WORKING WITH STATION MEMORIES

There are in total 500 memory presets within the unit. 100 memory

presets for each FM、MW、LW、SW 、AIR band.

METHOD 1: Auto Tuning Storage (ATS)

●FM ATS

1. Fully extend the telescopic antenna and press the [BAND]

button to select FM band;

2. Press & hold the [BAND] button until “PRESET” flashing and the

frequency is counting; now the unit starts scanning and storing

all available stations into the memories;

3. When the frequency stops counting, it means the ATS operation

is done completely. Now you can rotate the [TUNING] knob to

browse for those stored stations.

●MW/LW ATS

1. Press the [MW/LW] button to select MW/LW band;

2. Press & hold the [BAND] button until “PRESET” flashing and the

frequency counting; now the unit starts scanning and storing all

available MW/LW band stations into the memories；

3. When the frequency stops counting, it means the ATS operation

is done completely. Now you can rotate the [TUNING] knob to

browse for those stored stations.

●SW ATS

1. Fully extend the telescopic antenna and press the [BAND] button

to select SW band;