User Manual

►LISTENING TO STORED STATIONS

METHOD 1: MANUAL MEMORY TUNING

1. Press the [VM/VF] button to enter memory mode. “PRESET ” will

appear on screen；

2. Rotate the [TUNING] knob to tune into the stored station one

by one.

METHOD 2: AUTO BROWSE MEMORY

1. Press the [VM/VF] button to enter memory mode; “PRESET ” will

appear on screen;

2. Press & hold the / button until the “PRESET” flashing to

auto scan from one memory to another, staying on each station

for about 5 seconds;

3. To stop auto browse memory, simply press the / button.

Note: After the station has been found, you can press the [DELETE]

button to delete the station.

►DELETE MEMORY

METHOD 1. DELETING A SINGLE MEMORY MANUALLY

1. Press the [VM/VF] button, then you enter the address mode;

2. Press & hold the [DELETE] button until “DEL” and

“memory address” flashing;

3. Rotate the [TUNING] knob to select the memory that you want

to delete;

4. Press the [DELETE] button and you will completely delete

the frequency in this address until you hear a sound of “Be--”.

Note：If you do not press the [DELETE] button for 3 seconds

to confirm, the radio will automatically exit the delete operation.

METHOD 2: SEMI-AUTO DELETE MEMORY

1. Press the [VM/VF] button turn into memory address mode until

you hear a sound of “Be--”;