User Manual

16
Narrow band: It is suitable to receive weak & long distance stations
as narrow band is able to limit the interference from adjacent strong
signal and reduce background noise.
►SYSTEM-SETTING
(Operating in the OFF state)
SETTING FM FREQUENCY RANGE
Press & hold the [FM SET] button until 64.0-108MHz, 76.0-108MHz,
or 87-108MHz, 87.5-108MHz appears in the display.
SETTING MW (AM) TUNING
Press & hold [9/10 kHz] button until "9kHz" or "10kHz" appears on
the display to select your desired AM tuning step.
Note: When the AM tuning step is 10 kHz, the temperature displays
will auto switch to Fahrenheit (). When the AM tuning step is 9 kHz,
the temperature display will auto switch to Centigrade (). The 10
kHz step is mostly used in the USA.
TURN ON/OFF THE LW
Press & hold the [LW ON/OFF] button until “LW ON” or “LW OFF”
appears on the display to turn ON or OFF the LW respectively.
TURN ON/OFF THE "Beep (B)” SOUND:
With radio off, press & hold the [LW ON/OFF] button until "ON" or
"OFF" appears in the display to activate or deactivate the "Beep (B)”
sound respectively.
►SWITCH SOUND MODE
1.Turn on the radio and select any band you desired
2. Press & hold number“4”buttonyou can hear a sound of “B-B”
It shows that the switch was successful
3. The sound is in music mode when MUSIC is displayed and in
news mode when VOICE is displayed.