User Manual

第 12 页 共22页
ST for stereo/mono conversion
FM radio signal is stronger at the center of the city, usually receive in stereo way,
however in the remote area, the radio signal is not stable, usually switch to
mono mode to improve the effect of radio. In FM band, click on the "ST" icon to
turn on or turn off stereo effect. (note: when stereo is off ,the mono mode is
on)
LOC for local/remote radio receiving transformation
FM radio signal is stronger at the center of the city, usually receive in
local mode,
however in the remote area, the radio signal is not stable, usually switch
to remote mode
improve the effect of radio. This system can automatically switch between local
and remote radio mode according to the strength of the radio signal .
DVD playing basic operation
Tips:
If some disc occurs playing problem,please remove it and try another disc to
play. The wrong formatted discs can not be played
Some discs would be not play properly because of different configuration,
different feature, or different disc recording and editing software.
Disc Entry/Exit
During power on status of the player,take the printed side of disk as up
side,then softly insert the disc into disc slot. The system will draw and read the
disc automatically after it detects the disc successfully.After few seconds, the
system will play disc automatically.
Click the Exit key on panel of the product to exit the disc from disc slot.
If the disc is not removed in five seconds, the system will re-draw the disc but
will not automatically play the disc.
Only by pressing the exit key and re-insert the disc into disc slot, the system will
automatically play the disc.