User Manual

第 3 页 共22页
SAFETY PRECAUTION
Thanks for choosing vehicle multimedia audio & video series
products from our company. Please read this user manual carefully
before use and keep it properly for future reference.
To avoid human injury or other hazards, please read the following
precautions carefully before installation.
Please follow the instructions as below, or your machine may be
damaged, for which we assume no responsibility.
1. Avoid water or other liquids coming into this product.
2. Do not place or install this product in humid and high-temperature
places exposed to direct sunlight; prevent this product from touching
chemicals for a long time and prevent fire or other hazards; otherwise,
this product may be damaged.
3. If liquid crystal splashes due to sudden LCD breakage, prevent it from
touching your skin as well as getting into your eyes and mouth and
contact the maintenance man as soon as possible to replace the LCD.
Comply with local laws and regulations in replacing LCD.
4. Do not crush, press or scratch this product with hard objects.Clean its
surface with dry cloth and paper tower; do not wipe LCD screen with dry
flax or paper; to avoid any damage to this product.
5.If any abnormalities occur during operation, turn off the power
immediately and refer to “Trouble Shooting” for solving the problems; if
the trouble can not be cleared, contact dealer or local maintenance
station.
6. Replace fuse with a new one in the same size (current grade); it is
dangerous to use different fuses or wires, as damage may be caused.
7. This product includes AUX、SD、BT、IPOD、USB、GPS、DVD、VCD、 CD、MP3、
MP4,It also supports to receive TV and radio.
Installation Location
Do not install this product in the following positions:
a. In the position where driver’s view is blocked.
b. In the position where operations of steering wheel, gear lever and
brake pedal may be affected.
Installation:
1. Professional is required to install this product.
2. If you try to install it by yourself, please strictly follow the installation
instructions and connection diagram, as improper installation may cause
a fire.
3. Turn off or pull out the ignition key before installation, as battery
current leakage or short circuit may be caused when the engine is
running.
4. Make sure not to damage any pipe or wire and electronic parts of fuel
cell during installation; otherwise, it may cause fire. Be careful not to
damage any parts of car when digging holes on instrument panel.
5．Do not use nuts or screws to connect safety devices such as steering
connection device, fuel supply or brake system, as it may cause a fire or