Product Brochure

EFFLORESCENCE
MOLD WATER SEEPAGE SPALLING CRACKING DAMPNESS
Solves Common Basement Problems!
RadonSeal Solves Common Problems Caused By Concrete’s Porosity
Also protects against concrete dusting, wear, corrosion, pitting, crumbling and freeze-thaw, road salts, deicers, chemicals
RadonSeal Deep Penetrating Concrete Sealer is a user and
environment friendly, waterborne, silicate based sealer which penetrates deep into
concrete (up to 4 inches), chemically reacts, and permanantley seals concrete against water
seepage, water vapor, and even minute atoms of radon gas.
Use It Around Your Home or Business! Unlike other concrete sealers, RadonSeal delivers permanent
results! No re-application is ever needed. It does not leave a surface film therefore it can not wear away
or peel off. RadonSeal will not change the appearance or profile of the concrete leaving the surface suitable for paints,
adhesives, resurfacing, etc. Use RadonSeal on new or old concrete, indoor and outdoor, and concrete blocks.
•Basement Floors, Walls, or Slabs • Garage Floors, Patios, Pool Decks
• Driveways, Walkways, Stairs, Roofs • Stucco, Shotcrete, Limestone, Mortar
• Parking Garages, Water Cisterns, • Retaining Walls, Ponds
Moisture problems are the most common complaint of homeowners and your basement is by far the largest source of moisture
in your home. Covered floors and walls in a finished basement trap moisture and eventually cause; mold and mildew, musty odors,
and dampness. Make sure to protect your investment and your health by sealing the concrete with RadonSeal.
Protect Your Investment and Health!
1. Dampen the concrete surface with water using your hand-pump sprayer.
2. Spray RadonSeal onto the damp surface in a continuous glistening film.
3. Spray on a 2nd application of RadonSeal 30 minutes after your 1st application
(3-4 applications are required for more porous concrete).
4. In 2-3 hours after application, clean the surface with water and use of a push broom.
RadonSeal is non-toxic, nonflammable, and emits NO VOC’s. Simply apply
RadonSeal to bare, dry, and porous concrete using a hand-pump “garden” sprayer.
RadonSeal Standard or RadonSeal Plus? Use RadonSeal Standard for indoor and outdoor poured
concrete (less than 20 years indoors or 1 year outdoors).
Use RadonSeal Plus, with higher mineral content, on more porous materials like concrete blocks or older poured
concrete (more than 20 years indoors or 1 year outdoors).
18 L’Hermitage Drive, Shelton, CT 06484
[e-mail] • 1-800-472-0603
www.radonseal.com
POURED CONCRETE: 1,000 sq. ft. (in 2 applications)
CONCRETE BLOCKS: 500 sq. ft.
(in 3 applications)
CINDER BLOCKS: 400 sq. ft.
(in 4 applications)
COVERAGE (per 5-gallon pail) CONDITIONS
• Air and surface temperatures must be above freezing
• After a rain, let concrete dry for 2-3 days.
• Do not apply to hot surfaces in direct sunlight
• Clean sprayer and tools with water.
• Shelf Life: 1 year from purchase
CLEAN-UP & SHELF LIFE