Operation Manual

23
2.1.6 Cooling Function
Use this function if you don’t need cooling function on the selected
zone.
Example: Cooling function should be deactivated for room with
residual humidity, like Bathroom, kitchen...
- Select the line with the arrow cursor and Press (Ok) to choose
“Yes” or “no”.
- If you choose “Yes”, two supplementary lines must be appears,
these two lines will be used to adjust the settings temperatures which
must be followed in cooling mode.
Comfort setting (default value 22.0°C)
- Adjust here the setting temperature which must be followed by the
concerned zone during the day in cooling mode (summer).
Reduced setting (default value 24.0°C)
- Adjust here the setting temperature which must be followed by the
concerned zone during the night in cooling mode (summer).
Zones TH1
ITCS No
 Cooling Function Yes
Day 22.0°C
Night 24.0°C
Zones TH1
Working Mode
Program
ITCS No
 Cooling Function No
Monday 27 / 04 / 2009
11 :15
22.6°C
33% ITCS