Operation Manual

35
g) - When the configuration between MASTER-RF and Main zone
programmer RF has finished, the following screen must be
appear and the MASTER-RF should exit the “rF init” mode.
h) If you have another MASTER-RF in your installation repeat the
steps “a)” to “d)”.
i) For the RF configuration between the 2
nd
MASTER-RF and the
Main zone programmer select the line “init Master B”. The
following display must be appear,
j) - The main zone programmer will be learned with the 2
nd
MASTER-RF.
Note:
When you assigned the 2
nd
MASTER-RF with the main zone
programmer you don’t need to choose one or more zone. The
configuration is just used to supervise the 2
nd
MASTER-RF.
k) - When the configuration between MASTER-RF and Main zone
programmer RF has finished, the previous screen must be
appear and the MASTER-RF should exit the “rF init” mode.
l) Now your RF installation is totally finished, press several times
on ( ) to return to the main screen.
View:
Use this submenu to view the complete RF installation. (Which
thermostat manage which zone(s))
Init Master B
RF installation
 init Master A
Init Master B
View