User's Manual
Table Of Contents
- 1. General Information
- 2. Transport and Storage
- 3. Unpacking and Installation
- 4. Start-Up
- 5. Keyboard – Buttons Functions
- 6. Weighing Mode Home Screen
- 7. Operating Balance Menu
- 8. Weighing Operation
- 8. Adjustment
- 9. Working Modes – General Information
- 10. Databases
- 11. Communication
- 12. Peripheral Devices
- 13. Communication Protocol
- 14. Error Messages
- 19 -
7. OPERATING BALANCE MENU
Operation of balance software menu is intuitive and uncomplicated. The touch panel makes the
software operation easy. Pressing a function key, a soft key or an area on the display initiates an
assigned function or process
Touch screen operation is also possible while wearing gloves.
7.1. ENTERING BALANCE MENU
In order to enter balance menu, press
<PARAMETERS> button. Clicking any button comprised
within information section, or clicking any button with particular parameter name, results with change
of colour. This is for signalling purposes. If a given area has any function or action assigned, then it is
performed automatically upon clicking (e.g. adjustment procedure), respectively a particular window
with parameters or list of appropriate settings is displayed.
7.2. SCREEN SCROLLING
There are two methods for scrolling the screen of parameters window. The first one requires
pressing, holding down and scrolling up or down the scrollbar located on the left. The second one
requires pressing, holding down and scrolling up or down any point of the displayed window.