User's Manual

- 22 -
8.4. WEIGHING UNIT SELECTION
Change of weighing unit is carried out by pressing the weighing unit icon visible next to the value of
measurement result, or by clicking key (if displayed in an information section). Clicking the unit
triggers its replacement, the clicked unit is replaced with the unit that is next on the list of available
units.
Another option for unit replacement is selecting a particular unit out of the units list, to view the list
click key (if displayed in an information section).
Units list:
Unit Denotation
Verified
balance
Unit Denotation
Verified
balance
gram [g] yes Taele Singapore [tls] no
milligram [mg] yes * Taele Taiwan [tlt] no
kilogram [kg] yes * Taele China [tlc] no
carat [ct] yes * Momme [mom] no
pound [lb] no Grain [gr] no
ounce [oz] no Newton [N] no
ounce Troy [ozt] no Tical [ti] no
pennyweight [dwt] no baht [baht] no
Taele Hongkong [tlh] no tola [tola] no
mesghal [msg] no
* - Accessibility of measuring units is conditioned by balance type.
8.5. BALANCE ZEROING
Zeroing is a function allowing to zero mass indication. In order to zero mass indication, press
button. Mass indication of zero value shall be displayed together with precise zero
and stability
markers.
Zeroing process is an equivalent for determining new zero point, recognized by the balance as
precise zero. Zeroing is possible only for stable status of display indication.
CAUTION!
Zeroing the display indication is possible only within ±2% range of instrument’s maximum capacity. If the
zeroed value is above ±2% of the maximumcapacity, then the software indicates a respective error message.
8.6. BALANCE TARING
Taring is a function allowing to determine net weight of a measured object. In order to determine net
weight of the object, place object’s container (packaging) on the weighing pan, and on stabilization of
measurement result press
key. The display indicates mass equal zero and symbols: Net and
. On taking off the weighed load and its packaging from the weighing pan, the display indicates
sum of total tared mass with minus sign.
The software enables assigning tare value to a database-stored product. Using this option, the
software automatically uploads data on tare value for a particular product upon its selection from the
database.
CAUTION!
Taring negative values is impossible. On taring negative values the balance responds with an error message.
In such case, zero balance indication and repeat taring procedure.