User manual

- 105 -
 Pressing < PRINT> key causes releasing a printout and adding
a measurement to statistics,
 Pressing < Add to statistics> key causes ONLY adding a
measurement to statistics without releasing a printout.
As in any other working mode, balance user can define custom set of quick
access keys and data displayed in the grey coloured workspace.
Procedure:
1. Press grey coloured workspace,
2. The display indicates menu of: Settings, Keys, Information, Printout and
Profile,
3. Press <Settings> or <Information> key,
4. Assign keys to displayed quick access keys, and select information that
is displayed in the grey coloured workspace,
23.2. Additional settings of Statistics mode
The additional settings enable adjusting the working mode to user’s needs and
requirements. To access the setting follow below procedure:
Procedure:
1. Press grey coloured workspace,
2. Press <Settings> key,
3. The display indicates functions related to checkweighing, such as:
− Result control
− Tare mode
− Automatic footer printout
− Printout mode / Value release
− Printout
Means of using the above functions are given in point 10.8. “Additional
parameters on weighing process”.
23.3. Parameters related to a series of measurements
Each series of measurements can be accompanied by the following options:
previewing results, printing report, deleting last measurement, deleting all
results in a statistics.