User manual

- 140 -
List of data defined for control:
Pictogram Data Description
Name Name
Code Product code
EAN code Product EAN code
Mass Product nominal mass
Tare
Tare value of a product (pre-set
automatically while selecting a product
out of the database)
PGC mode
Control type: Non-destructive average
tare, Non-destructive empty – full,
Destructive full –
empty, Destructive
empty – full
Batch
Series of measurements for control:
Non-destructive empty – full,
Destructive full – empty, Destructive
empty – full
Unit Unit of a product: [g] or [ml]
Batch
quantity
Declaration of number of items of
controlled batch
Time interval
for avarage
tare
estimation
Time interval given in [h] determining
how often average tare must be
estimated for a given product
Numer of
packagings
Declaration of number of packagings
that are to be used for process of
average tare estimation (for Non-
destructive average tare type of
control)
Internal
control
Submenu for defying criteria for internal
control (see the next chart)
Density
Product density (value range 0,1g/cm
3
-
5g/cm
3
)
Apart from above listed options there are other ones which may be used for
different working modes (e.g. CHECKWEIGHING, THRESHOLDS, etc.)