User manual

- 155 -
27.13. A report on product control
An example of a report:
----- PCG Report: U/22/08/12/14/22 -----
----------------------------------------
Balance type PS 3Y
Max capacity 1000 g
Reading unit 0.001 g
Balance ID 9908684
Start date 2012.08.22 14:20:11
End date 2012.08.22 14:22:35
User
Product 1
Batch no. 555
Nominal mas 10 g
Tare 10.0002 g
Value of T1 error 0.9 g
Value of 2T1 error 1.8 g
Value of +T1 error g
Value of +2T1 error g
Batch quantity 100
No. of measurements 30
No. of T1 errors 0
No. of 2T1 errors 0
Min 49.999 g
Max 50.001 g
Average 50.00057 g
Total 1500.017 g
Average limit 9.99969 g
Average limit [+] g
Standard deviation 0.000626 g
PGC mode Non-destructive average tare
Result Positive
Measurements
1. 49.999 g
2. 49.999 g
.
.
28. 50.001 g
29. 50.001 g
30. 50.001 g
----------------------------------------
Signature
........................................
Report template:
The balance user in the submenu < Printouts/ Printout template of a
CPG report > can edit a template of a report on product control. The variables
attributed to <YES> are printed in a report.