User manual

- 168 -
2. Result
[status (result) of a control]
3. Start date
[date of control start]
4. End date
[date of control end]
5. Product
[name of a controlled product]
6. User
[name of a user carrying out the control]
7. Average
[average value from carried out
measurements]
8. Average limit
[average disqualifying value]
9. Standard deviation
[average standard deviation]
10. Quantity
[the value batch quantity (batch size) for
which the software accepts the size of
tested sample in accordance with the
regulation]
11. No. of measurements
[no. of completed measurements]
12. Method
[control method (internal criteria,
regulated by the act)]
29.9. Average tares
(function not available in standard balance version)
Before starting a <Non-destructive average tare> control it is possible to
determine the average tare value by weighing the packages. Each of above
processes is automatically saved in the < Average tare>database. Each
control saved in the database on determining average tare value features its
specific number set at the moment of its completion.
Control number format:
X / y y / M M / d d / H H / m m, T where:
X - control type which takes the following values:
U – control regulated by the act,
Z – control completed by a user,
W - control regulated by an internal criteria
yy – year of control end,
MM – month of control end,
dd – day of control end,
HH – hour of control end,
mm – minute of control end,
T – control with determining the average tare value.
Balance user can preview data on each process of average tare determination.
Procedure
• Enter submenu < Databases> in accordance with point 27 of this user
manual,
• Enter < Average tare>database and select a desired record.