User manual

- 8 -
1. BASIC INFORMATION
INTENDED USE
Balances 3Y series are intended to precise mass measurement of weighed
loads conducted in laboratory conditions.
PRECAUTION MEASURES
 Before first use of the balance, it is highly recommended to carefully
read this User Manual, and operate the balance as intended.
 Do not operate the touch panel using sharp edged tools (knife,
screwdriver, etc.).
 Place weighed loads on the center of balance’s weighing pan.
 Load the balance’s weighing pan with loads that gross mass does not
exceed instrument’s measuring range (maximal capacity).
 Do not leave heavy loads on balance’s weighing pan for a longer period
of time.
 In case of defect immediately unplug the instrument from mains.
 Balances to be decommissioned, should be decommissioned in
accordance to valid legal regulations.
 Do not use the balance is areas endangered with explosion. Balance Y2
series is not designed to operate in EX zones.
WARRANTY CONDITIONS
A. RADWAG feels obliged to repair or exchange all elements that appear to be
faulty by production or their construction,
B. Defining defects of unclear origin defects and means of their elimination can
only be realized with assistance of manufacturer and user representatives,
C. RADWAG does not bear any responsibility for defects, losses or accidents
resulting from unauthorized or inadequate performing of production or
service processes,
D. Warranty does not cover:
• Mechanical defects caused by product exploitation other than intended,
defects of thermal and chemical origin, defects caused by lightning,
overvoltage in the power network or other random event,
• Balance defects if it is utilized contrary to its intended use,