User manual
- 26 -
The balance returns to weighing with the accuracy of the I weighing range d
1
=1g
and II weighing range pictogram is blanked.
10. BALANCE MAIN PARAMETERS
It is possible to adjust balance’s operation to ambient conditions at a workstation
(by setting filter range and value release parameters) or user requirements
(autozero settings, last digit visibility). These parameters are set in group P3
rEAd.
10.1. Setting filtering level
- using UNITS key to select desired value of filter settings
StAnd – (normal) – normal operation conditions
Slouu – (slow) – harsh operation conditions - vibrations, etc.
Fast – (fast) – good operation conditions – no vibrations, etc.
Go back to weighing mode with procedure of saving changes
(see point - 8. 2. – return to weighing).
CAUTION:
The higher filtering setting the longer weighing time.