User manual

- 82 -
16.4.1. Format of data sent on pressing of PRINT key
Depending on setting of P4.5 PStb parameter only stable measurement or
instantaneous mass indication will be sent.
CAUTION:
For verified balances printout of instantaneous measurement data is
blocked.
Printout format
1
2
3
4 - 12
13
14 - 16
17
18
stability
marker
space
sign
mass
space
unit
CR
LF
stability marker [space] if stable
- [?] if unstable
- [^] if there is an error of range exceeding on +
- [v] if there is an error of range exceeding on -
sign [space] for positive values or [-] for negative values
mass 9 marks alignment to the right
unit 3 marks alignment to the left
16.4.2. Format of data sent as response for commands generated
from a computer
On receipt of a command, balance responses with:
XX_A CR LF command understood, in progress
XX_I CR LF command understood, but currently not available
XX _ ^ CR LF command understood, but max range is exceeded
XX _ v CR LF command understood, but min range is exceeded
XX _ E CR LF error occurred while carrying out the command time
limit exceeded while waiting for stable measurement result (time
limit is characteristic parameter of balance)
XX name of command
And followed by: