User manual
Table Of Contents
- 1. BASIC INFORMATION
- 2. TRANSPORT AND STORAGE
- 3. UNPACKING, INSTALLATION AND COMMISSIONING
- 4. GETTING STARTED
- 5. BALANCE LEVELING
- 6. MENU STRUCTURE
- 7. WEIGHING
- 8. BASICS ON TERMINAL AND SOFTWARE OEPRATION
- 9. BALANCE SOFTWARE
- 10. BALANCE ADJUSTMENT
- 11. DISPLAY CALIBRATION
- 12. BALANCE USER SELECTION
- 13. PERIPHERALS
- 14. ABOUT
- 15. COMMUNICATION
- 16. UPDATE
- 17. LEVELING
- 18. BALANCE ADAPTATION – USER SETTINGS
- 18.1. Adding a new operator
- 18.2. Deleting a operator
- 18.3. Selecting a operator
- 18.4. Operator settings
- 18.5. Quick access to determining working modes parameters
- 18.6. Parameter of working mode WEIGHING – quick access keys
- 18.7. Parameter of working mode WEIGHING – information
- 18.8. Parts Counting
- 18.9. Checkweighing
- 18.10. Dosing
- 18.11. Percent setup
- 18.12. Animal weighing
- 18.13. Density of solids, liquid and air
- 18.14. Formulations
- 18.15. Statistics
- 18.16. Mass Comparison
- 18.17. Differential weighing
- 19. ACCESS TO BALANCE PARAMETERS
- 20. TECHNICAL DATA
- APPENDIX A – cooperation with EPSON printer
- APPENDIX B – cooperation with KAFKA printer
- APPENDIX C – cooperation with label printer CITIZEN
- APPENDIX D – databases
- 111 -
> pictogram
On completing measurements of final mass for the samples in a a user can check
the results in the database of s.
To check the results, enter the database of s and select a .
Select a sample to be previewed. The opened window provides the following
information:
displayed next to weighing data <B> denote measuring cycles.
Data on a specific can be printed or exported to a file.