User manual

- 112 -
18.17.3. Copy tare
The function enables copying a selected tare value of a sample in a series to all
samples that do not have a tare assigned and for which the differential weighing
process (status other than Weighing B) is not completed.
Means of operation:
Press button
To open window with a list of samples for
which the tares are assigned.
Press the tare value field to be applied to other
samples in a (those not having a tare
assigned).
The software automatically applies the
selected tare value to data of those samples.
18.17.4. Use of “SAMPLE SELECTION” function.
The function enables
selecting a sample that is prepared for weighing, with no need
to go through all the samples in a series, and for which the process is available. The
function is available only after initiating a process <Weighing A> or <Weighing B>.
Means of operation:
While in the differential weighing mode, and
after selecting a , press <Weighing B> button.
The balance starts the process if a series
contains any samples for which the final mass
measuring process <B> is available.
Press button
To open a list of samples for which the above
procedure is available.
Select a sample to be weighed from the
displayed list.
This option is particularly useful if a series
contains a large number of samples, and the
user should weigh a sample that is at the end
of a series.