User manual

- 120 -
o Set width and height of a label and
distance between the labels.
o The port settings have no relevance as
the printing process is carried out on a
connection between a balance and a
printer.
o Check printer settings regarding paper
type and print intensity.
o If a label is printed from a computer,
check printer settings and port settings.
Adding constant texts
o Press pictogram and enter a text to be
printed. Text size is adjustable. Other
fields not related to texts are not relevant.
o The constant texts are also those located
in front of or following variables, e.g.:
Net mass:
Adding variables
o Press pictogram and enter number of
a variable to be printed. Use variable
number as specified in the list of
variables. The variable number is
dynamically replaced by its corresponding
value with printing a label.
o List of variables is contained in balance
software:
Symbol Variable description
{2} Date
{3}
Time
{4} Date and time
{6} Net mass in current measuring unit
{7}
Net mass in adjustment unit
{8} Gross mass
{9} Tare
{12} Minimum limit
{13} Maximum limit
{32} Factory no.
{33}
Reading interval
{35} Parts counting: Mass of a standard
{36} Percent setup: Mass of a standard
{75}
Operator: Name