User manual
Table Of Contents
- 1. BASIC INFORMATION
- 2. TRANSPORT AND STORAGE
- 3. UNPACKING, INSTALLATION AND COMMISSIONING
- 4. GETTING STARTED
- 5. BALANCE LEVELING
- 6. MENU STRUCTURE
- 7. WEIGHING
- 8. BASICS ON TERMINAL AND SOFTWARE OEPRATION
- 9. BALANCE SOFTWARE
- 10. BALANCE ADJUSTMENT
- 11. DISPLAY CALIBRATION
- 12. BALANCE USER SELECTION
- 13. PERIPHERALS
- 14. ABOUT
- 15. COMMUNICATION
- 16. UPDATE
- 17. LEVELING
- 18. BALANCE ADAPTATION – USER SETTINGS
- 18.1. Adding a new operator
- 18.2. Deleting a operator
- 18.3. Selecting a operator
- 18.4. Operator settings
- 18.5. Quick access to determining working modes parameters
- 18.6. Parameter of working mode WEIGHING – quick access keys
- 18.7. Parameter of working mode WEIGHING – information
- 18.8. Parts Counting
- 18.9. Checkweighing
- 18.10. Dosing
- 18.11. Percent setup
- 18.12. Animal weighing
- 18.13. Density of solids, liquid and air
- 18.14. Formulations
- 18.15. Statistics
- 18.16. Mass Comparison
- 18.17. Differential weighing
- 19. ACCESS TO BALANCE PARAMETERS
- 20. TECHNICAL DATA
- APPENDIX A – cooperation with EPSON printer
- APPENDIX B – cooperation with KAFKA printer
- APPENDIX C – cooperation with label printer CITIZEN
- APPENDIX D – databases
- 25 -
3. date / time
Indicates current date and time. Pressing this display field opens a menu for changing
date and time settings.
4. level status
A level pictogram informing on current level status of the balance. Pressing this display
field opens a leveling assistant. Description of the leveling process is provided further in
this user manual.
CAUTION: Flashing dot of the level pictogram indicates warming-up process of the level
indicating electronic components. Warming up time is approximately 2 hours.
5. mass indication
Display field for indicating measurement result. It contains data of weighing result (5a),
measuring unit (5b), bargraph informing on applied measuring range (5c) and
pictograms of weighing status: stability, Net, autozero (5d). Pressing the measuring unit
field (5b) opens a window for selecting one of available measuring units.
Pressing the weighing result (5a) field changes the look of this window section into a
large one that replaces the workspace area. It facilitates reading the weighing result from
a distance. The enlarged window section is closed by repeated pressing its field.
6. workspace area
The workspa
ce area contains additional data (information) on an enabled working mode,
and facilitating balance operation. The software enables displaying maximum 6 items of
additional information.
Selection of data to be previewed in the workspace area (for quick access keys – see
below) is carried out individually for each balance user.
On changing a logged user the data contained in the workspace area and referring to a
working mode also change. Pressing the workspace area field opens a menu window for
changing the application settings.
7. access to balance menu
A pictogram for entering balance main menu.
8. quick access keys
This display section is dedicated for the function keys enabling quick accessing the most
frequently used functions and settings.
Selection of function keys (and information in the workspace area – see above) is
carried out individually for each balance user.
On changing a logged user the function keys present in the bottom bar change (together
with the data contained in the workspace area).